WORK Wheels × JDM Concept · GT Series
GT5-1P
100% genuine WORK, direct from Japan. One all-in price — GST & duties included, delivery quoted at checkout.
20+ yrs · 39,000+ wheels sold
All-in pricing — GST & duties included
Insured delivery or Sydney pickup
100% recommended on Facebook
Fitment
Will it clear my brakes?
Front brake clearance — verified fitments
These specs clear factory-fitted front brakes. Guard and tyre fitment is your mechanic's call.
Not on the list yet — send us your car and we'll check it.
Order
Choose your set
Pick your set
Filter by PCD, diameter, width, colour and offset. Can't find what you're looking for? Contact us.
Pay your way
In stock: bank transfer, or Zip only when every item in the order is in stock. Prices inc. GST & duties · delivery quoted at checkout.
Delivery or pickup
Insured, tracked courier delivery Australia-wide (Sydney next business day), or pick up from Matraville NSW.
Filter wheels
18 sets
GT5-1P · AHG Bronze
F 5-100 18×9.0 +38 Mid dish & Concave
R 5-100 18×10.0 +38 Deep dish & Concave
GT5-1P · AHG Bronze
F 5-100 18×10.0 +38 Deep dish & Concave
R 5-100 18×10.0 +38 Deep dish & Concave
GT5-1P · Glim Silver
F 5-100 18×10.0 +38 Deep dish & Concave
R 5-100 18×10.0 +38 Deep dish & Concave
GT5-1P · AHG Bronze
F 5-114.3 18×9.0 +30 Mid dish & Concave
R 5-114.3 18×9.0 +30 Mid dish & Concave
GT5-1P · Glim Silver
F 5-114.3 18×9.0 +30 Mid dish & Concave
R 5-114.3 18×9.0 +30 Mid dish & Concave
GT5-1P · Glim Silver
F 5-114.3 18×9.0 +38 Mid dish & Concave
R 5-114.3 18×9.0 +38 Mid dish & Concave
GT5-1P · AHG Bronze
F 5-114.3 18×9.0 +30 Mid dish & Concave
R 5-114.3 18×10.0 +38 Deep dish & Concave
GT5-1P · AHG Bronze
F 5-114.3 18×9.0 +30 Mid dish & Concave
R 5-114.3 18×10.0 +18 Deep dish & Concave
GT5-1P · Glim Silver
F 5-114.3 18×9.0 +30 Mid dish & Concave
R 5-114.3 18×10.0 +38 Deep dish & Concave
GT5-1P · Glim Silver
F 5-114.3 18×9.0 +30 Mid dish & Concave
R 5-114.3 18×10.0 +18 Deep dish & Concave
No set in that combination.
Showing of sets
4 sets
GT5-1P · AHG Bronze
F 5-100 18×9.0 +38 Mid dish & Concave
R 5-100 18×9.0 +38 Mid dish & Concave
GT5-1P · Glim Silver
F 5-100 18×9.0 +38 Mid dish & Concave
R 5-100 18×9.0 +38 Mid dish & Concave
GT5-1P · Glim Silver
F 5-100 18×9.0 +38 Mid dish & Concave
R 5-100 18×10.0 +38 Deep dish & Concave
GT5-1P · AHG Bronze
F 5-114.3 18×9.0 +38 Mid dish & Concave
R 5-114.3 18×9.0 +38 Mid dish & Concave
No set in that combination.
Showing of sets
Custom build · any spec
Can’t see your spec? We’ll build it.
Tell us your car
and the size, offset & finish you want
We reply
within 1 business day
Order & we build it
pay the deposit and we start your build
Completes the set
Genuine WORK nuts, caps and rings that fit the GT5-1P.
| Thread | Compatible with |
|---|---|
| M12 × 1.25 | All Nissan · All Subaru · All Suzuki |
| M12 × 1.50 | All Honda (except FK8) · All Mazda · All Mitsubishi · All Toyota |
Note: Toyota 86 / Subaru BRZ use the M12 × 1.25 thread.
- WORK wheel nuts are tapered, designed to match all WORK wheels.
- Excludes discontinued models: Equip 01 and Equip 03.
- May not clear some Emitz centre-disk models.
- May also suit other brands with tapered seats.
- If you’re unsure, please ask before ordering.
RS Nuts · Blue
M12 × 1.25 · Hex 21 · 34mm
RS Nuts · Black
M12 × 1.50 · Hex 21 · 34mm
RS Nuts · Blue
M12 × 1.50 · Hex 21 · 34mm
RS Nuts · Red
M12 × 1.50 · Hex 21 · 34mm
Royal Nuts · Chrome
M12 × 1.25 · Hex 21 · 33mm
RC Nuts · Blue
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Red
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Black
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Blue
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Red
M12 × 1.50 · Hex 19 · 50mm
RS-B Nuts Billet M12/M14 · Black
M12 × 1.25 · Hex 21 · 31mm
RS-B Nuts Billet M12/M14 · Chrome
M12 × 1.25 · Hex 21 · 31mm
RS-B Nuts Billet M12/M14 · Black
M12 × 1.50 · Hex 21 · 31mm
RS-B Nuts Billet M12/M14 · Chrome
M12 × 1.50 · Hex 21 · 31mm
RS-B Nuts Billet M12/M14 · Black
M14 × 1.50 · Hex 21 · 35mm
RS-B Nuts Billet M12/M14 · Chrome
M14 × 1.50 · Hex 21 · 35mm
RS Nuts · Black
M12 × 1.25 · Hex 21 · 34mm
RS Nuts · Red
M12 × 1.25 · Hex 21 · 34mm
Royal Nuts · Chrome
M12 × 1.50 · Hex 21 · 37mm
RC Nuts · Black
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Green
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Orange
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Purple
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Green
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Orange
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Purple
M12 × 1.50 · Hex 19 · 50mm
RCS Nuts M14 × 1.50 · Black
M14 × 1.50 · Hex 21 · 50mm
RS-Z Bolts Billet (Euro) · Black
M14 × 1.25 · Hex 17 · 28mm
RS-Z Bolts Billet (Euro) · Black
M14 × 1.50 · Hex 17 · 28mm
RS-Z Bolts Billet (Euro) · Chrome
M14 × 1.50 · Hex 17 · 28mm
Compatible Models
These centre caps fit the following WORK / JDM Concept models:
CR-Kai and Kiwami are different models. If you're unsure, please ask before ordering.
Check that the cap will clear your drive shaft. Depending on the car, you may need the high-cap model — or it may not fit at all. Compare the flat vs high type below.
Flat type vs High type
All black · High cap
JDM Concept collaboration edition
All black · Low cap
JDM Concept collaboration edition
Silver “WORK” · High cap
Silver “WORK” · Low cap
Black / red ring · Low cap
Black · High cap
Black · Low cap
Blue · High cap
Blue · Low cap
Black / red ring · Low cap
Red · High cap
Red · Low cap
Silver · High cap
Silver · Low cap
All black · Low cap
M.C.O Racing logo
WORK hub rings are machined from aluminium for strength and durability. They fill the gap between your car's hub and the wheel's centre bore — WORK sizes its centre bores to suit most cars, so most fitments leave a small gap.
Left unfilled, that gap can cause vibration. The ring makes the fit hubcentric — centring the wheel and removing the vibration.
Not sure which ring suits your vehicle? Ask us before ordering.
* Please check which model is compatible.
60.1 → 54mm
Toyota · Mazda · Daihatsu (PCD 100)
66.5 → 57mm
Audi · VW (PCD 112)
72.5 → 64mm
Honda Civic Type R FK8 / FL5 (PCD 120)
73.3 → 56mm
Subaru (PCD 114.3)
73.3 → 60mm
Toyota · Lexus (PCD 114.3)
73.3 → 64mm
Honda (PCD 114.3)
73.3 → 66mm
Nissan (PCD 114.3)
73.3 → 67mm
Mitsubishi · Mazda (PCD 114.3)
73.3 → 70mm
Honda S2000 (PCD 114.3)
60.1 → 56mm
Honda · Mitsubishi · Subaru · Toyota 86 / BRZ · BMW MINI (PCD 100)
60.1 → 57mm
VW (PCD 100)
Sizing
18"
Included with each wheel
1 X Black valve
1 X Decal
Width & Offset
18 X 9.0 - [ 5-100 +38 / 5-114.3 +30, +38] - Mid dish with mid Concave
18 X 10.0 - [5-100 +38 / 5-114.3 +18, +38] - Deep dish with deep Concave
[Mid dish] - 40mm
[Deep dish] - 70mm
Note: 5-100 18x9.0 +30 is not available as we did not make this size.
Wheel colour options
Standard
• AHG Bronze [AHG]
Premium
• Glim Silver [GTS]
Catalogue
Customer builds
On real cars
Mazda RX7F: 5-114.3 18x9.0 +30 (255/35/18) · R: 5-114.3 18x9.0 +30 (255/35/18)
Nissan Silvia 180SXF: 5-114.3 18x9.0 +30 (10mm spacer added) · R: 5-114.3 18x10.0 +18
Mazda RX7F: 5-114.3 18x9.0 +30 (255/35/18) · R: 5-114.3 18x9.0 +30 (255/35/18)
Mitsubishi EVO 8
Toyota Supra
Toyota 86
Toyota 86
Toyota Chaser
Subaru WRX
Nissan Silvia S15
Nissan Skyline GTR32
Nissan Skyline R34F: 5-114.3 18x9.0 +30 · R: 5-114.3 18x10.0 +38
Mitsubishi Lancer
Mitsubishi EVO 7
Honda Odyssey RB3
Subaru Forester
Honda Integra DC5
Mitsubishi EVO 8
Subaru WRX STIWORK GT5 [F] 5-114.3 18X10 +18 [R] 5-114.3 18X10 +18 GLIM SILVER
Nissan Silvia S14WORK GT5 [F] 5-114.3 18X10 +18 [R] 5-114.3 18X10 +18 MATT BLACK
Toyota 86WORK GT5 · [F] 5-100 18X10 +38 · [R] 5-100 18X10 +38 · GLIM SILVER
Toyota 86WORK GT5 · [F] 5-100 18X10 +38 · [R] 5-100 18X10 +38 · AHG BRONZE
Honda Integra DC5WORK GT5 [F] 5-114.3 18X10 +18 [R] 5-114.3 18X10 +18 GLIM SILVER
Real builds on Instagram
@jdmconcept.auCan't see your spec?
If WORK makes it, we can build it. Send us your car and the size, offset, PCD and finish you're after — we'll check brake clearance and quote it.
Frequently asked questions
Yes — every wheel is 100% genuine WORK, shipped direct from WORK Wheels Japan to our Sydney warehouse. Never a replica. We’ve been the official Australian distributor since 2006, and you can verify us on the WORK Wheels Japan website. We’re JDM Concept Pty Ltd, ACN 43 120 929 713, trading from the same Sydney warehouse and the same domain since 2006.
Ask us before you buy. Send your car and the model you’re after, and we’ll tell you what clears your brakes, based on real cars we’ve fitted. Guard clearance and tyre setup we leave to your mechanic: confirm those, then send us the spec and we’ll quote it.
In stock: tap Buy and pay by bank transfer (Westpac) — or Zip only when every item in the order is in stock. Built to order in Japan: send us your car and spec, we reply within 1 business day with a quote and ETA, then a deposit — 35% in most cases — locks the build in, or pay in full. Every order gets a tax invoice. We don’t take card or PayPal — it keeps pricing sharp.
Yes — made to order to your diameter, width, offset, PCD and finish. Most models support 4x100, 4x114.3, 5x100, 5x112, 5x114.3 and 5x120. Singles and pairs available too.
Wheel prices already include GST and import duties, so there’s nothing extra to pay at customs. Delivery is by insured courier, quoted before you pay, fully insured and tracked. Sydney next business day; most capitals 1–3 days. Japan orders get an ETA, with a heads-up about a week before they land. Or pick up by appointment from Matraville NSW, Sydney 2036.
- Buy it now price
- Your price
Enter the code at checkout