WORK Wheels · Nuts & bolts
RC Nuts
The WORK Racing (RC) nut is built for the track. Set of 20 + 1 key.
2020+ yrs · 39,000+ wheels sold
$All-in pricing — GST & duties included
Free insured Express Post Australia-wide
f100% recommended on Facebook
Fitment
Which thread fits my car?
Your car make
Pick your make to see your thread — or check the table.
Toyota uses M12 × 1.50
86 is the exception — it uses M12 × 1.25.
Toyota 86 / Subaru BRZ uses M12 × 1.25
Nissan uses M12 × 1.25
Subaru uses M12 × 1.25
Honda uses M12 × 1.50
Except Civic Type R (FK8) — ask us before ordering.
Mazda uses M12 × 1.50
Mitsubishi uses M12 × 1.50
Suzuki uses M12 × 1.25
Check your wheels: Not suitable for Equip 01, Equip 03 and Emitz O-disk.
Before you order
- WORK wheel nuts are a 60° taper, designed to match WORK wheels.
- May also suit other brands with a 60° taper seat.
- Thread not listed here? See the other WORK nuts below.
- Unsure? Ask us before ordering. Contact us
Order
Choose your set
Pick thread & colour
Not sure of your thread? Contact us.
Pay your way
Bank transfer, or Zip only when every item in the order is in stock.
Free Express Post
Sent free by Express Post, insured and tracked. No pickup for accessories.
Filter sets
Check your wheels: Not suitable for Equip 01, Equip 03 and Emitz O-disk.
RC Nuts · Blue
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Red
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Black
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Blue
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Red
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Black
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Green
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Orange
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Purple
M12 × 1.25 · Hex 19 · 50mm
RC Nuts · Green
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Orange
M12 × 1.50 · Hex 19 · 50mm
RC Nuts · Purple
M12 × 1.50 · Hex 19 · 50mm
No set matches.
Specifications
About the RC Nuts
The WORK Racing (RC) nut is built for the track. Open-ended to clear extended studs and just 25g per nut. One set is twenty nuts, including four lock nuts with a special key.
- In the set
- Set of 20 + 1 key — 16 nuts, 4 lock nuts
- Thread
- M12 × 1.25M12 × 1.50Check which one matches your car’s wheel studs
- Hex
- 19mm
- Length
- 50mm
- Material
- A6061-T6 aluminium
- Seat
- 60° taper — matches WORK wheels
- Colours
- Black, Blue, Green, Orange, Purple, Red
- Design
- Open-ended — clears extended studs
- Weight
- 25g per nut
Installation
Fitting your nuts / bolts
Tightening torque
Recommended, for 60° taper
- 1
Check the hub
Wheel studs (or bolt holes) and the hub face must be clean and free of rust, dirt or damage. Check the nut or bolt thread matches your car.
- 2
Start by hand
Thread every nut or bolt in by hand, then snug them lightly in the order shown below.
- 3
Torque wrench only
WORK recommends 90–120 N·m for M12 / 160–180 N·m for M14 — tighten in a star pattern, never with an impact wrench.
- 4
Re-torque at 100 km
Re-check every nut or bolt with the torque wrench after about 100 km, and after every tyre rotation.
Tightening order
Snug the nuts or bolts lightly in this order, then torque them in the same order.
- Keep a spare set of wheel nuts or bolts in the car.
- Only use nuts or bolts with a 60° taper seat — the type WORK wheels are made for.
- Keep the lock-nut key in the car — you need it to remove the wheel.
Real builds on Instagram
@jdmconcept.au →Frequently asked questions
Are the wheels genuine?
Yes — every wheel is 100% genuine WORK, shipped direct from WORK Wheels Japan to our Sydney warehouse. Never a replica. We’ve been the official Australian distributor since 2006, and you can verify us on the WORK Wheels Japan website. We’re JDM Concept Pty Ltd, ACN 43 120 929 713, trading from the same Sydney warehouse and the same domain since 2006.
How do I know they’ll fit my car?
Ask us before you buy. Send your car and the model you’re after, and we’ll tell you what clears your brakes, based on real cars we’ve fitted. Guard clearance and tyre setup we leave to your mechanic: confirm those, then send us the spec and we’ll quote it.
How do I order — and how do I pay?
Accessories
In stock: tap Buy and pay by bank transfer (Westpac), or Zip only when every item in the order is in stock. Order from Japan: tap Buy and pay by bank transfer; we confirm the ETA. Every order gets a tax invoice.
Wheels
In stock: tap Buy and pay by bank transfer (Westpac) — or Zip only when every item in the order is in stock. Built to order in Japan: send us your car and spec, we reply within 1 business day with a quote and ETA, then a deposit — 35% in most cases — locks the build in, or pay in full. Every order gets a tax invoice. We don’t take card or PayPal — it keeps pricing sharp.
Can I order custom sizes, offsets and PCDs?
Yes — made to order to your diameter, width, offset, PCD and finish. Most models support 4x100, 4x114.3, 5x100, 5x112, 5x114.3 and 5x120. Singles and pairs available too.
What’s delivery like?
Accessories
Free Express Post from Sydney, insured and tracked. No pickup. Japan orders get an ETA, with a heads-up about a week before they land.
Wheels
Sydney pickup by appointment (Matraville NSW 2036), or insured, tracked delivery Australia-wide by insured courier, quoted before you pay.
Both
Prices already include GST and import duties — nothing extra to pay at customs.
- Buy it now price
- Your price
Enter the code at checkout